A novel noise reduction technique for underwater acoustic signals based on complete ensemble empirical mode decomposition with adaptive noise,minimum mean square variance criterion and least mean square adaptive filter

Underwater acoustic signal processing is one of the research hotspots in underwater acoustics. Noise reduction of underwater acoustic signals is the key to underwater acoustic signal processing. Owing to the complexity of marine environment and the particularity of underwater acoustic channel, noise reduction of underwater acoustic signals has always been a difficult challenge in the field of underwater acoustic signal processing. In order to solve the dilemma, we proposed a novel noise reduction technique for underwater acoustic signals based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), minimum mean square variance criterion (MMSVC) and least mean square adaptive filter (LMSAF). This noise reduction technique, named CEEMDAN-MMSVC-LMSAF, has three main advantages: (i) as an improved algorithm of empirical mode decomposition (EMD) and ensemble EMD (EEMD), CEEMDAN can better suppress mode mixing, and can avoid selecting the number of decomposition in variational mode decomposition (VMD); (ii) MMSVC can identify noisy intrinsic mode function (IMF), and can avoid selecting thresholds of different permutation entropies; (iii) for noise reduction of noisy IMFs, LMSAF overcomes the selection of decomposition number and basis function for wavelet noise reduction. Firstly, CEEMDAN decomposes the original signal into IMFs, which can be divided into noisy IMFs and real IMFs. Then, MMSVC and LMSAF are used to detect identify noisy IMFs and remove noise components from noisy IMFs. Finally, both denoised noisy IMFs and real IMFs are reconstructed and the final denoised signal is obtained. Compared with other noise reduction techniques, the validity of CEEMDAN-MMSVC-LMSAF can be proved by the analysis of simulation signals and real underwater acoustic signals, which has the better noise reduction effect and has practical application value. CEEMDAN-MMSVC-LMSAF also provides a reliable basis for the detection, feature extraction, classification and recognition of underwater acoustic signals.     

多矢量水听器低频近场目标协同定位算法

针对水下小平台难以实现低频近场目标定位的问题,研究了基于多个矢量水听器的协同定位算法。算法将多个矢量水听器视为不同的观测点,利用矢量水听器阵列流型特点估计出目标相对于不同观测点的方位角,根据这些方位角信息利用正交矢量算法对近场目标进行定位,避免了多维搜索过程,减少了计算量。仿真结果表明,算法能够准确地定位低频近场目标,有效地提高定位精度。     

基于粒子群算法的宽带真延时平面阵列方向图综合

针对大阵元间距平面阵列方向图综合问题,提出基于粒子群算法的宽带真延时平面阵列方向图综合方法。该方法根据真延时条件下阵列方向图主瓣和栅瓣指向的特点,采用宽带真延时抑制阵列方向图的栅瓣；利用粒子群优化算法优化阵列结构,得到具有较高主副瓣比的平面阵列方向图。通过对8×8的矩形平面阵进行仿真,验证了所提方法的有效性,在此基础上,还仿真研究了该方法对栅瓣的抑制性能与信号带宽之间的关系。     

飞行器有源对消隐身技术

隐身技术已经成为现代高性能飞行器设计的重要支撑,是先进战机的基本要求。现行的隐身设计方法主要包括气动外形优化以及隐身材料涂覆。随着雷达探测能力的不断提升,尤其在米波雷达探测背景下,外形优化与隐身涂层变得不再有效,有源隐身技术被重新予以重视并有望成为新的隐身技术突破点。本文着重分析了有源对消技术的基本概念、技术现状以及相应的关键技术,对该技术体制的优势和特点进行了归纳和总结。     

断裂复合材料层压板贴片快速修复工艺研究

采用CMR-1A复合材料热补仪和3234/G814复合材料预浸料贴片,对完全断裂的复合材料层压板进行双面修复。通过正交试验法获得了最佳修复工艺参数:固化温度为130℃;固化时间为80 min;贴片层数为5层(单面);真空度为0.04 MPa;贴片长度为50 mm。对优化工艺参数进行试验验证,结果表明:复合材料层压板拉伸强度从0 MPa增加到320.84 MPa,提高了57.29%;LY12CZ铝合金和45钢板拉伸强度恢复率分别为96%和75.53%。